Patreon 2021 Complete Back Catalog NOV’20-Nov’21 13 months

$200.00

Patreon 2021 Complete Back Catalog NOV’20-Nov’21

Some of the stuff but not close to all of it. Too much to list need to redo this area

2 Merchant Stands

  • 3 roof variations each
  • Includes Resin and FDM style Roof
  • 6 Slide in walls
  • Butcher, Tavern, Hardware, and Grocery Settings
  • 6 changeable table tops
  • 1 abandoned stand
  • Early prototype also included

4 Baths

  • One with food counter
  • cloth lined

Heavy Plow

  • Will come with ox

Cooper/Barrel Making

  • Windlass for Barrel Bending
  • Partial Barrel with charring pot
  • Aging barrel wood
  • Hollow Barrel
  • Pairs up well with the Wheel Wright Set

Wheel Wright Shop

  • Small Forge (for making iron rings)
  • Forgers tool table
  • Large Bellows
  • Anvil
  • Carpentry Tool Table
  • Wheel Parts Table
  • Spoke Setting Station
  • Small cart waiting for wheels

6 Plants

  • In wood carved pots
  • Based on Exotic Plants

Primitive Miller/ Watch Tower

  • Includes aqueduct
  • Set up for FDM printing Only
  • Detailed Grind Stone set up
  • Functional Door

Battery Shed

  • Shed for side of building
  • Set up for FDM printing Only
  • Can hold 9V Battery and switch for people running lights
  • Has notches at ground for running wires out

 

      • 3 Shacks sizes each in timber and stone style, 6 total
      • Goblin Watch Tower and Sky Walks
      • 6 thatch roof options using 2 styles. 18 total. Half for previous buildings
      • 7 roadside scatter stone fences
      • Lost Road and Lost Road Ruins + Rubble Scatter. 20 Total Pieces
      • Swamp Goblin Walkways, 2 height options
      • Goblin Watch Tower
      • Cobble Stone Square with clip on shoulders. 9 Parts total
      • One 12 inch city block prototype. 4 x 6″ parts
        • 3 Shacks sizes each in timber and stone style, 6 total
        • 1st Huge Peasant Shack
        • 6 thatch roof options using 2 styles. 9 total. 6 for previous buildings
        • Barrack Expansion 6 parts
      • Large Dual Purpose Ruin-to-Bandit hideout conversion
        • Gigantic Abbey Ruin 300x400x300mm+
        • Joust Field set up
      • Lost Road Extras
        • Large 3 story Inn
        • 3rd Story can repeat to make taller building
        • Full set of Square Badland Miniature Stands
          • 6-20mm, 6-25mm, 4-25x50mm, 3-40mm,3-50mm
          • 2-50x75mm, 2-50x100mm, 2-75mm
        • One Part 3 Building set #1 for smaller scales (Beta)
        • Furniture set Part #1
      • 29 Pieces
      • Large Inn Expansion
      • 3rd Story can repeat to make taller building
      • Full set of Square Badland Miniature Stands set up for zero support resin or FDM printing
        • 6-20mm, 6-25mm, 4-25x50mm, 3-40mm,3-50mm
        • 2-50x75mm, 2-50x100mm, 2-75mm
      • Full Set of Round Badland Bases set up for zero support resin or FDM printing
      • Furniture set Part #2
        • 19 Pieces
        • Supports released later in month
        • Sheds, Work Sites, Goblin Hut, Pig Pens & Mini Stands: May Patreon 2021

          Full Construction Site

          • 2 Wheelbarrows
          • Half constructed building with optional floorboards
          • Mason Rock Stand
          • 3 Tool Tables
          • 2 Empty Tables
          • 2 plank Piles
          • Wood Beam Stack
          • 3 Sawhorse work sites

          Wood Cutting Work Site

          • Wood Splitting with Ax
          • Sawhorse log cutting station
          • Split log pile
          • Whole log pile
          • Chopped wood pile
          • Chopped wood stack

          Ceramics Work Site

          • Open Kiln with Pots
          • Kiln with mud roof
          • Pottery Wheel
          • Bench full of Pots

          Tanners Work Site

          • 2 Tanning pit lined with cow horns
          • 1 Tool Table
          • Hide Scrapping work station
          • 2 Stretch racks
          • 1 Stack of hides

          Small Buildings

          • Small stable
          • Goblin mud hut
          • Modest work shed with 7 slide in wall variations
          • 3 Pig pens

          Miniature Bases

          • Full set of Square Wood Plank Floor Miniature Stands set up for zero support resin or FDM printing with 5-2 multiples
          • Full Set of Round Wood Plank Floor Bases set up for zero support resin or FDM printingVideo for April
            • 2′ Circle Pallisade
            • 2 Celtic Round Houses and 1 ruin
            • 2 Story Halfling Home
            • Full set of Square Dungeon Floor Miniature Stands set up for zero support resin or FDM printing6-20mm, 6-25mm, 4-25x50mm, 3-40mm,3-50mm
              2-50x75mm, 2-50x100mm, 2-75mm
            • Full Set of Round Dungeon Floor Bases set up for zero support resin or FDM printing

            ROUNDS

            3_25mm, 3_32mm, 3_40mm, 50mm, 60mm, 80mm, 100mm, 130mm, 160mm

            OVALS

            60x35mm, 75x46mm, 90x52mm, 105x70mm, 170x105mm, 120mmx92mm

            PILL

            25x70mm

            • Full set of Blank Bases for both round and square
            • 19 Standing stones, scalable

Description

Patreon 2021 Complete Back Catalog NOV’20-Nov’21

Join Patreon for Reduced Price on this product via Coupon Code

Customer Support

We are fanatical part testers and are alway improving quality control to eliminate any end user issues. However, If you still find issues just reach out using the email above. You can also join my Open_Peg development group on Facebook to voice any issues, or if you just want to see the CS in action before buying.

Compatibility

Pieces are designed to print on 8×8 beds. Models are tested on and GUARANTEED for Sli3r (including Prusa Control), Cura, and makerware/desktop.

Versatility

Our buildings are NEVER just ONE building. Any 3D Model Building, fort, or castle showcased on our site is merely an example. ALL of our buildings are designed to make many variations. In some cases, the options number in the dozens. We have developed our own vertical stacking system ( Open [] peg ) that we use in tandem with OpenLOCKConnectors to maximize the possibilities.

Details

Our STL Models are all HIGHLY detailed and will continue to be relevant as 3D printing innovates and improves.

Professional Design

99% percent of our files are designed to print without supports (GUARANTEED). Supports are usually built in when they are necessary. All of our models use snap, peg, or clip connectors and will assemble without glue. All models are error free. (GUARANTEED)

Scale

Our models are designed on the large side of true 28mm miniatures and will work perfectly well for 32mm miniatures as well. I consider this size to be as close to a generic “standard” as anyone can get. Our models will work with 25mm Miniatures though it starts to feel a bit bulky

Settings

ur models focus on dark fantasy settings. The generous wall and walkway designs are ideal for wargames like Warhammer and skirmish games like Chainmail. Many of our fort designs could even see use for gladiator games or Blood Bowl. Our models are also great for all manner of tabletop roleplaying games like Dungeons & Dragons, Pathfinder, or Frostgrave.

Reviews

There are no reviews yet.

Be the first to review “Patreon 2021 Complete Back Catalog NOV’20-Nov’21 13 months”

Your email address will not be published. Required fields are marked *