September 2022: Witch of Haunt Wood Mine Part 1


September 2022 Patreon: Haunt Wood Mine Part 1

      • Mine Elevator
      • Miners Barracks
      • Witch House
      • 3 Mountains (with caves)
      • 2 Foot+ Plateau  (30+ inch footprint)


September 2022 Patreon Witch of Haunt Woods Mine Part 1


Welcome to September 2022 on Tribes! This month we put out a ton of stuff, including Part 1 of our “Witch of Haunt Woods Mine.” October will feature the second half of this GIANT release! All models are designed to stand alone but obviously you would miss out on a lot of versitility with just one part. This month includes:
  • Mine Elevator : This is a 2 story Mining elevator with horse powered operation. The mine elevator technically works but is really too light to be effective without gluing it all down. You use your own string, no 3d printed ropes. Elevator car is set up for both resin and fdm printing. Horses are resin. The rest is set up for support free FDM on a 8×8 bed. Chitubox files supplied for optional resin parts.
  • Miners Barracks: with granary and watch tower. Granary can be stand alone and used with parts from the Granary we released a couple months.
  • Witch House: This is a 2 story A-Frame, towers are large enough for 1 mini. October will include a basement/plateau expansion. It is cut into 3 main parts, but has a 5 part option to avoid 24hr prints. I will add furniture for this in October and a plateau /basement dungeon and kitchen.
  • 3 Mountains (with caves):There are 3 mountains. The bottom layer is cut so it can be used as rooms or supports underneath the plateau. Top levels of the mountain can be used as scatter rock options. I will add more to this in October.
  • **2 Foot+ Plateau  (30+ inch footprint):**A giant Plateau with a foot print around 30 inches. Over 2 feet of playable top area, basically an end table. Optional mine entrance in images. Sections glue together with bars that are much more snap into place than the option supports for the scriptorium plateau. It is tighter because they have to be used on this larger plateau. I will release a road ramp next month for the plateau.
All of this is set up for Support free FDM Printing on 8×8 inch beds. Some smaller parts have optional resin set ups.



Pieces are designed to print on 8×8 beds. Models are tested on and GUARANTEED for Sli3r (including Prusa Control), Cura, and makerware/desktop.


Our buildings are NEVER just ONE building. Any 3D Model Building, fort, or castle showcased on our site is merely an example. ALL of our buildings are designed to make many variations. In some cases, the options number in the dozens. We have developed our own vertical stacking system ( Open [] peg ) that we use in tandem with OpenLOCKConnectors to maximize the possibilities.


Our STL Models are all HIGHLY detailed and will continue to be relevant as 3D printing innovates and improves.

Professional Design

99% percent of our files are designed to print without supports (GUARANTEED). Supports are usually built in when they are necessary. All of our models use snap, peg, or clip connectors and will assemble without glue. All models are error free. (GUARANTEED)


Our models are designed on the large side of true 28mm miniatures and will work perfectly well for 32mm miniatures as well. I consider this size to be as close to a generic “standard” as anyone can get. Our models will work with 25mm Miniatures though it starts to feel a bit bulky


ur models focus on dark fantasy settings. The generous wall and walkway designs are ideal for wargames like Warhammer and skirmish games like Chainmail. Many of our fort designs could even see use for gladiator games or Blood Bowl. Our models are also great for all manner of tabletop roleplaying games like Dungeons & Dragons, Pathfinder, or Frostgrave.


There are no reviews yet.

Be the first to review “September 2022: Witch of Haunt Wood Mine Part 1”

Your email address will not be published. Required fields are marked *