Iron Works and More!
This is a huge water wheel powered, iron works set. 90% of the set is geared for resin printing and comes with chitubox support files. a few things like the giant blast furnace are intended for FDM printing. The set is huge with the following features:
- 10 inch tall blast furnace. (aligns with our scaffolding)
- 2 giant bellows opperated with trip hammer
- Giant water wheel with gear options on both side
- Trip operated stampers the 3 ore trays
- Trip hammer with 2 slots and 3 hammer options
- Aqueduct with boosters to create hight variations for turns
Plateaus And Hills
This is a set 4. 2 hills and 2 plateaus. They are set up for FDM printings.The hills are smaller 2 part prints, the plateaus are larger and divided into 4 parts each and require a 8 inch print bed. This is the first set, they are low. the plateaus will work will provide a base for most small and medium buildings with room left over. These are born out of my personal dissatisfaction with styrofoam. It is intended that you scratch build on top of these.
Icehouse and Granary
The set features an Ice House and a Granary. They are set up for resin printing though certain parts could be FDM printed or printed with auto-supports. There is a stack of ice that you can resin print in clear or clear-blue. The Granary can be elevated at 3 height options.
These are both, often overlooked but essential buildings. The granary is designed to prevent rodents from getting into dried grain. The central chamber of the icehouse is actually intended to be very deep. The ice is there to represent the top of what is a deep pit.
These building are solid models for scaling. They have NO interior or playable space. Support files are NOT provided as the options for scale are many. I have left these buildings at 28mm scale for anyone who wants to vase print with supports. These models are not for 3d print novices.
Pieces are designed to print on 8×8 beds. Models are tested on and GUARANTEED for Sli3r (including Prusa Control), Cura, and makerware/desktop.
Our buildings are NEVER just ONE building. Any 3D Model Building, fort, or castle showcased on our site is merely an example. ALL of our buildings are designed to make many variations. In some cases, the options number in the dozens. We have developed our own vertical stacking system ( Open  peg ) that we use in tandem with OpenLOCKConnectors to maximize the possibilities.
Our STL Models are all HIGHLY detailed and will continue to be relevant as 3D printing innovates and improves.
99% percent of our files are designed to print without supports (GUARANTEED). Supports are usually built in when they are necessary. All of our models use snap, peg, or clip connectors and will assemble without glue. All models are error free. (GUARANTEED)
Our models are designed on the large side of true 28mm miniatures and will work perfectly well for 32mm miniatures as well. I consider this size to be as close to a generic “standard” as anyone can get. Our models will work with 25mm Miniatures though it starts to feel a bit bulky
ur models focus on dark fantasy settings. The generous wall and walkway designs are ideal for wargames like Warhammer and skirmish games like Chainmail. Many of our fort designs could even see use for gladiator games or Blood Bowl. Our models are also great for all manner of tabletop roleplaying games like Dungeons & Dragons, Pathfinder, or Frostgrave.
There are no reviews yet.